HOME You are here: Socomec UPS power systems
Socomec UPS power systems
SOCOMEC UPS
DELPHYS ® DS
APPLICATIONS
20 to 40 kVA three-phase requirements, with three-phase input.
For supplying critical applications in specific environments.
ADVANTAGES
For the most demanding environments
DELPHYS ® DS is designed to adapt to the harshest environmental constraints: robust construction, special paint, antidust filter, enhanced degree of protection (IP) to resist external agents, redundancy and component ventilation control.
The DELPHYS ® DS inverter is designed to supply non-linear loads without any downgrading, providing high quality output voltage at all times.
A reliable, safe power supply for computer and industrial systems
For a high level of availability of high quality energy, the technology used by the DELPHYS ® DS integrates an isolation transformer in the UPS bridge. The rectifier and the by-pass can be supplied from different sources, with no specific adaptation required.
DELPHYS ® DS provides complete galvanic separation between the continuous circuit (rectifier-battery) and the loads. When the constraints of the neutral system require it, DELPHYS ® DS monitors the isolation level of the continuous circuit.
DELPHYS ® DS has considerable overload capacities allowing it to supply applications such as drive motors, smoke extractors...
The DELPHYS ® DS's short circuit current facilitates the choice of protective devices to provide discrimination in upstream distribution. To facilitate your installation, these protective devices may be incorporated into the equipment.
DELPHYS ® DS has been designed to be integrated into your electrical network.
Three-phase high quality energy from 60 to 200 kVA
ADVANTAGES
There are two versions to meet your requirements
• DELPHYS MP with an SCR rectifier
• DELPHYS MP elite with an IGBT rectifier.
High quality power supply
• delivered by SVM digital modulation
• adapted to supplying new blade server loads with a leading power factor up to 0.9
• with sinusoidal current for non-linear loads (Crest Factor 3:1).
High availability
• a fault tolerant architecture with redundancy
of basic functions, such as the ventilation system
• a variety of architectures for parallel operations, to deal with redundancy, management and changes in power output.
Easily integrated equipment
• DELPHYS MP elite includes an IGBT rectifier which virtually eliminates harmonic distortion,
thus removing any stress on your power supply network
• high-level power factor for reduced apparent power consumption: 0.99
• the ideal solution for grouping with generator sets without using an excessively large
generator.
Battery availability at all times
• EBS function with an innovative charge algorithm which adapts to the environmental
conditions and the condition of the battery to increase its life
• BHC function: an advanced monitoring system able to locate and correct battery charging anomalies, for higher confidence in your battery.
Choice of architecture for different parallel systems either with modular or centralised bypass parallel units.
A rectifier with low THDI to meet your requirements for three-phase high quality energy from 250 to 500 kVA (up to 3000 kVA with parallel connection).
ADVANTAGES
Voltage quality
SVM (Space Vector Modulation) digital regulation gives sinusoidal output voltage with all load types.
Suitable for supplying today's loads
Operates without downgrading actual power to supply applications with a capacitive power factor up to 0.9.
Easy integration into your electrical network
• DELPHYS MX elite includes a rectifier specificallyto draw the sinusoidal current(4.5%THDI)which will not pollute your upstream network.
• Input power factor close to 1 (ind. 0.93) reduces current consumption.
• Fully compatible with gen-set without generator oversizing.
Increased service-life for batteries
An innovative and intelligent battery charging mode (EBS) for increased battery lifetime.
- Cost-effective
• A compact assembly in a single cabinet (width 1.60 m, up to 500 kVA excluding batteries)
Easy to install and space-saving.
• With this rectifier you don't need oversized upstream sources (transformer and gen-set) and
input current is reduced by up to 20% to give you savings on distribution (equipment and
cables)
• Exceptional efficiency saves on operating costs. Choice of architecture for different
parallel systems either with modular or centralised bypass parallel units.
High availability
• Fault tolerant architecture with built-in
Choice of architecture for different parallel systems either with modular or centralised bypass parallel units.
